Core Cutters

All Elite Cameron core cutting machines utilize the same free running; crush cut knife principle providing clean burr-free cuts, quickly and efficiently without noise or dust.

CC100 Core Cutter
A very efficient, converter size, core cutting machine normally held in stock, and designed for relatively low volume core users.
CC100A Core Cutter
A low cost, semi automatic, core cutting machine, which has been designed for the converter who has a medium volume requirement of various different cut sizes. The operator loads the parent core on to the loading chute and enters the cut size and quantity required. The machine grips and indexes the core in to the machine, takes a trim cut and proceeds to cut the size and quantity requested, ejecting the finished cores on to the loading chute or into a container mounted below the cutting area. The core and cutting area are totally enclosed for safety.
CC150 Core Cutter
Designed to accommodate large core diameters up to 400mm and lengths up to 5 meters. Although a manual core cutting machine, the blade is indexed pneumatically eliminating operator fatigue and eliminating safety issues. This machine is particularly popular in Paper and Board Mills.
CC200 Semi-automatic Core Cutter
A technological market leader and is aimed at high volume cut core users that require superb accuracy.
Servo driven CC300 Core Cutter
Fully automatic and can be left running without supervision. Information can be downloaded from a remote source eliminating the need for a dedicated operator.

You might also be interested in Slitter Rewinders, Centre Winders and Hot Melt Coaters

MODEL PARAMETERS	CC100	CC100a	CC150	CC200	CC300
Machine Style	Manual & Heavy Duty Core Cutter	Semi Automatic Core Cutter	Heavy Duty Core Cutter	Semi Automatic Core Cutter	Fully Automatic Core Cutter
Max Parent Core Length (mm)	1600(std.) 2500(opt.)	2000	2000(std.) 4000 (opt.)	3000	3000
Max Core inside diameter (mm)	152(std.) 200(opt.)	152	152(std.) 400(opt.)	152(std.) 300(opt.)	152(std.) 300(opt.)
Min Core inside diameter (mm)	30(std.) 25 (opt.)	38	70(std.)	38	38
Max Core Wall Thickness (mm)	19	19	19	19	19
Cutting Method	Crush Cut Blade	Crush Cut Blade	Crush Cut Blade	Crush Cut Blade	Crush Cut Blade
Electrical Supply	110v or 240v 1ph	380/415v 3ph 50/60Hz	110v or 240v 1ph	380/415v 3ph 50/60Hz	380/415v 3ph 50/60Hz